display enclosure 3d model

Create a rectangular display enclosure designed to hold a standard Funko Pop box. IMPORTANT: The INTERNAL CLEAR SPACE must measure: Width: 4.65 inches (118 mm) Height: 6.40 inches (163 mm) Depth: 3.65 inches (93 mm) The front must be COMPLETELY OPEN, with no panel, glass, frame, bars, or obstruction, so the Funko Pop box can be inserted from the front. Create solid left, right, top, and bottom walls. The back must have a REMOVABLE SLIDING REAR PANEL. Design vertical sliding rails/grooves on the left and right rear edges of the enclosure so a separate flat back panel can slide vertically into position from the top. The rear panel must be a SEPARATE PIECE from the main enclosure and should fit into the grooves with a small clearance suitable for FDM 3D printing. Recommended wall thickness: 3 mm. Recommended sliding clearance: 0.3–0.4 mm per side. Keep the geometry simple, symmetrical, clean, and optimized for 3D printing. Use straight walls and square 90-degree corners.