3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773951132
03-20 16:25
Model Name
plastic enclosure 3d model
Tags
props
3d printing
realistic
Prompt
Design a compact two-piece electronics enclosure made entirely of plain plastic geometry. CRITICAL — READ FIRST: This model contains ONLY plastic parts. No PCBs, no electronic components, no circuits, no solder joints, no chips, no wires, no connectors, no metal parts of any kind are to be modeled or appear anywhere in the scene The colored zones are simply flat colored plastic floor surfaces painted onto the base tray floor — they are just colored rectangles recessed 0.5mm into the floor surface to visually indicate where a real component will be placed later by hand Do not model, imply, or suggest any electronic component in any way. If it has circuits on it, do not include it Overall dimensions: 110mm (L) × 80mm (W) × 40mm (H), wall thickness 2mm, internal corners filleted 1mm, external corners filleted 2mm. Every part is plain grey plastic except the three colored floor zones. BASE TRAY — plastic only: Floor has three recessed colored zones, each 0.5mm deep, flat, no detail inside them: Solid blue rectangle — 62.5mm × 25.4mm, positioned along the back wall of the tray interior, left-aligned. This is where the PCA9685 will sit Solid green rectangle — 51mm × 28mm, positioned front-left of the tray interior beside the blue zone, with a 6mm grey gap between them. This is where the ESP32 will sit Solid black rectangle — 62mm × 30mm, on the exterior bottom face of the base. This is where the battery holder will sit Everything outside those three rectangles is flat grey plastic floor. STANDOFFS — plain grey hollow plastic cylinders only, no threading detail: 4× standoffs at corners of the blue zone, 8mm tall, 4mm outer diameter, 2.5mm inner hole 4× standoffs at corners of the green zone, 8mm tall, 4mm outer diameter, 2.5mm inner hole 2× standoffs on the base floor above the black zone for battery holder retention, 3mm tall, 4mm outer diameter, 2.5mm inner hole WALL CUTOUTS — rectangular slots cut through the plastic walls, nothing inside them, just open holes: Left short wall: one 12mm × 6mm open slot (for USB port access), one 14mm × 6mm open slot above it (for power switch) Back long wall: one 10mm × 8mm open slot at the left end aligned to the blue zone (for terminal block wire access) Front long wall: one continuous 65mm × 12mm open slot along the bottom edge aligned to the blue zone (for servo wire access) Base floor: one 12mm × 8mm open slot at the edge of the black battery zone (for battery wires to pass upward) LID — separate plain grey plastic part: Flat 2mm thick grey plastic rectangle, 110mm × 80mm 1.5mm interior alignment lip around the perimeter 4× plain M2.5 cylindrical holes in corners, no threading detail 2× rectangular ventilation slots 20mm × 2mm cut through the lid above the blue zone Show the lid floating 15mm above the base as a separate body so both parts are visible at the same time CHASSIS MOUNTING TABS — plain grey plastic: 4× rectangular tabs 8mm × 10mm extending outward from each base corner Each tab has one plain 2.5mm cylindrical hole through it Tabs are flush with the base bottom face Nothing else. No labels, no text, no logos, no electronic components, no wires, no decorative features of any kind. Two plastic parts only: base tray and lid.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773951132
Anonymous1773951132