3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781737783
06-30 14:41
Model Name
robotic steering mechanism 3d model
Tags
3d printing
3d printing realistic
chassis
machine
machine 3d printing
machine 3d printing realistic
machine realistic
motor
realistic
steering
Prompt
Design a simple and compact 3D steering mechanism for a DIY robotic car. The system uses one standard servo motor (MG995 or MG996R) mounted in the center to steer two front wheels. Each wheel is powered by a vertical TT DC gear motor. The motor body is mounted vertically, and the wheel is attached directly to the motor shaft. I do NOT need a complete chassis. I only need the steering mechanism that holds the two motors and allows them to rotate left and right. Requirements: - Two identical motor holders for vertical TT gear motors. - Each motor holder rotates around a vertical kingpin for steering. - One steering arm on each side connected by tie rods. - A center-mounted servo connected to both steering arms. - Simple, lightweight, and strong design with the minimum number of parts. - Suitable for 3D printing (PLA or PETG). - Use M3 screws and bearings or bushings for the steering pivots. - Steering angle of approximately ±30°. - The wheel mounts directly to the TT motor shaft. - K
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1781737783
Anonymous1781737783