electronics enclosure 3d model

Design an industrial-style square enclosure box specifically sized to fit a TP-Link Deco M5 router inside. The Deco M5 is 120mm diameter and 38mm tall, so the internal cavity must be at least 125mm x 125mm x 45mm. Do not make the enclosure smaller than this. The box must have: - Square shape, flat bottom, no feet. - 3mm thick walls. - Open top. - Ventilation slots on all four walls. Slots must be large functional horizontal cutouts, suitable for airflow and cable routing. Now create a separate top lid that fits flush onto the box: - The lid must include four recessed magnet sockets (not holes) positioned at the center of each edge. - Each magnet socket must be 6mm diameter and 3mm deep, and must NOT go through the lid. They must be enclosed pockets for inserting magnets. - The box body must also have four matching 6mm diameter, 3mm deep enclosed magnet sockets aligned with the lid. These sockets must be closed at the bottom and must not be through-holes. The top surface of the lid must contain a recessed,