3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1773564142
03-15 09:10
Model Name
electronics enclosure 3d model
Tags
3d printing
3d printing realistic
electronics enclosure
machine
machine 3d printing
machine 3d printing realistic
machine realistic
realistic
Prompt
"Generate a high-detail, technical CAD-style STL model of a custom two-part electronics enclosure (base and snap-fit lid) for an IoT device. The enclosure must be hollow with a wall thickness of 3 mm. The rectangular base part should have precise internal dimensions of **7.5 cm length, 6 cm width, and 3.7 cm height**. It should feature rounded exterior edges. Specific features on the base include: * A centered USB-C port cutout on one of the **6 cm width** sides. * Two small circular wire pass-through holes on one of the **7.5 cm length** sides (similar to the placement shown in `image_0.png`, but without the internal standoffs). * A clean pattern of horizontal ventilation slots on the side panels. * **no mounting standoffs or internal screw points. The lid and base must be designed with matching snap-fit features for assembly. The separate, matching top lid must be flat with rounded corners and include the following features on the top surface: The brand name 'QUAD BINARY'
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773564142
Anonymous1773564142Anonymous1773564142