3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
dalvarez
02-11 21:23
Model Name
guitar headstock hanger 3d model
Tags
3d printing
3d printing realistic
backplate
headstock
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Make a 3D printable FIXED GUITAR HEADSTOCK WALL HANGER. NOT a shelf. NOT a tray. NO platform. NO basket. NO storage. Two parts: 1) Gothic arch WALL PLATE: flat back, thickness 10–12 mm, 2 countersunk screw holes vertically aligned (5 mm clearance) spaced 90 mm apart. 2) FORKED YOKE with NECK SLOT (standard guitar hanger): U-shaped fork with a slot where the neck rests behind the nut. Slot width 45–50 mm, slot depth 25–30 mm, slot height 25–30 mm. Arms thickness 14–16 mm, arms length 45–55 mm, upward safety lips at tips. Padding grooves on inner slot faces for rubber/silicone strips. Standoff from wall 35–45 mm MAX. Solid base block 45 mm wide with 3 gusset ribs under the fork. Smooth radii everywhere, watertight manifold, minimal supports. Export STL with both parts separated.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
dalvarez
dalvarezdalvarez