?

Servo mount 3D Models

Find the best Servo mount 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :
servo-drivenmicro-servosg90-servoservo-motor
Design a parametric mechanical mounting assembly to connect an MG90S micro servo motor with an A2212 BLDC motor. The design must include three integrated parts: 1. SERVO MOUNT CASE: - Fit standard MG90S servo dimensions: 22.8mm × 12.2mm × 28.5mm - Include side mounting flanges with 2 holes (diameter 2.5mm) on each side - Add bottom base plate thickness: 3mm - Provide tight-fit cavity with 0.3mm tolerance 2. ROTATIONAL COUPLER / HORN ADAPTER: - Connect directly to MG90S servo shaft (spline compatible, use circular horn mount) - Diameter: 20mm disc - Thickness: 4mm - Include central screw hole (M2) - Add 4 radial mounting holes (M3, evenly spaced at 90 degrees) - This plate will hold the BLDC motor mount 3. BLDC MOTOR MOUNT (A2212): - Circular mount for A2212 motor (standard 16mm × 19mm hole spacing) - Hole diameter: 3mm (M3 screws) - Motor base diameter: ~27mm clearance - Add raised standoff height: 10mm from coupler plate 4. STRUCTURAL SUPPORT: - Add triangular ribs between servo
Anonymous1775150590
Anonymous1775851602
Generate a 3D printable Pan-Tilt servo mount with the following specifications: DESIGN STYLE: Industrial mecha / robotics aesthetic. Sharp angular geometry with hexagonal facets, visible structural ribs, and engraved panel lines. Think sci-fi weapon turret meets precision engineering tool. COMPONENTS (4 separate STL parts): PART 1 — PAN Bracket (rotates with servo 1): - U-shaped yoke, 70mm wide, 50mm tall arms - Each arm has 10mm circular boss for TILT servo axle - Structural ribs on outer faces (1.5mm raised, 5mm spaced) - Snap-fit attachment to servo horn - Engraved "PAN" text and directional arrow on side face
Anonymous1771200313
Generate a 3D printable Pan-Tilt servo mount with the following specifications: DESIGN STYLE: Industrial mecha / robotics aesthetic. Sharp angular geometry with hexagonal facets, visible structural ribs, and engraved panel lines. Think sci-fi weapon turret meets precision engineering tool. COMPONENTS (4 separate STL parts): PART 1 — Fixed Base: - 80 x 60 x 25mm rectangular base with 4 corner mounting holes (M3, 3mm dia) - Central circular pocket (22mm dia, 8mm deep) to seat SG90 servo body flush - Two servo horn screw holes (M2, symmetrical) - Hexagonal texture pattern on top face for grip - Beveled edges 2mm chamfer all around - Internal cable channel 4mm wide running center to rear exit
Anonymous1771200313
Generate a 3D printable Pan-Tilt servo mount with the following specifications: DESIGN STYLE: Industrial mecha / robotics aesthetic. Sharp angular geometry with hexagonal facets, visible structural ribs, and engraved panel lines. Think sci-fi weapon turret meets precision engineering tool. COMPONENTS (4 separate STL parts): PART 1 — Fixed Base: - 80 x 60 x 25mm rectangular base with 4 corner mounting holes (M3, 3mm dia) - Central circular pocket (22mm dia, 8mm deep) to seat SG90 servo body flush - Two servo horn screw holes (M2, symmetrical) - Hexagonal texture pattern on top face for grip - Beveled edges 2mm chamfer all around - Internal cable channel 4mm wide running center to rear exit
Anonymous1771200313
3D printable Pan-Tilt servo mount, industrial mecha robotics aesthetic. Sharp angular geometry, hexagonal facets, structural ribs, sci-fi turret style. 4 parts: 1. FIXED BASE: 80x60x25mm, central pocket for SG90 servo, 4 corner M3 holes, hexagonal texture on top, internal cable channel 2. PAN BRACKET: U-shaped yoke 70mm wide, 50mm arms, snap to servo horn, ribs on outer faces, engraved "PAN" text 3. TILT BRACKET: saddle mount for second SG90, 45x35mm front platform, M2 mounting holes, cable tie anchors 4. TOP PLATFORM: 50x40mm, M2/M3 mounting grid 10mm spacing SPECS: walls 2.5mm min, no overhangs over 45deg, servo slots 0.2mm tight fit, joints 0.4mm clearance, FDM print ready, PLA/PETG compatible. STYLE: chamfered edges 1.5mm, raised logo "TURRET-MK2" on base, matte micro-texture surface, panel line engravings.
Anonymous1771200313
Anonymous1772090177
mounting braket do secure a rc car servo
Anonymous1771180721
Anonymous1769358342
A compact 3D model of a robotic arm base designed to hold SG90 servo motors, with screw holes for secure mounting. The base should be flat and stable, with a footprint not exceeding 4000 mm², suitable for 3D printing.
Anonymous1770900578
请帮Servo SG90D舵机设计一个盒子
Anonymous1770293437
Rebuild the uploaded STL model as a clean parametric CAD model and generate TWO separate output files. Output File 1: • Recreate the original model exactly as provided. • Clean the mesh, repair imperfections, and export as "servo_mount_original.stl". Output File 2: • Create an adjusted version where ONLY the internal servo mounting slot width is increased by +3 mm. • Expand the internal opening equally on both sides. • Keep all external dimensions, mounting holes, and outer geometry unchanged. • Maintain minimum wall thickness of 2.5 mm for structural strength. • Smooth and rebuild geometry as a solid CAD body. • Export as "servo_mount_wide_fit.stl". General requirements: • Do NOT scale the full model. • Ensure both files are watertight, high-resolution, and ready for 3D printing. • Maintain dimensional tolerance ±0.2 mm.
Anonymous1764416851
Create a precise, engineering-grade 3D model of a palm-side servo mount for the ME-US ME-X8 micro servo, placed exactly in the same orientation as the reference image, assuming it is mounted on the LEFT palm. ■ Orientation Definition (critical) - The model is positioned as if resting on the LEFT hand. - In this orientation: • Left side of the image = Thumb side. • Right side of the image = Little-finger side. • Top of the image = Forward direction (toward the fingers). • Bottom of the image = Wrist direction. • Front face of the servo = Facing the palm. - All openings, holes, and directions must follow this coordinate definition exactly. ■ Base Plate - Rectangular base plate: 60 mm (width, thumb-to-little-finger) × 30 mm (height, finger-to-wrist) × 2 mm thickness. - Rounded corners with a radius of approximately 5 mm. - Two Velcro strap loops located at the far left and far right edges: • Internal opening: 20 mm width × 2.5 mm height. • Wall thickness: 1.5 mm. • Loops open upward, toward the
Anonymous1765184510
Create a precise, engineering-grade 3D model of a palm-side servo mount for the ME-US ME-X8 micro servo, placed exactly in the same orientation as the reference image, assuming it is mounted on the LEFT palm. ■ Orientation Definition (critical) - The model is positioned as if resting on the LEFT hand. - In this orientation: • Left side of the image = Thumb side. • Right side of the image = Little-finger side. • Top of the image = Forward direction (toward the fingers). • Bottom of the image = Wrist direction. • Front face of the servo = Facing the palm. - All openings, holes, and directions must follow this coordinate definition exactly. ■ Base Plate - Rectangular base plate: 60 mm (width, thumb-to-little-finger) × 30 mm (height, finger-to-wrist) × 2 mm thickness. - Rounded corners with a radius of approximately 5 mm. - Two Velcro strap loops located at the far left and far right edges: • Internal opening: 20 mm width × 2.5 mm height. • Wall thickness: 1.5 mm. • Loops open upward, toward the
Anonymous1765184510
Generate a mechanical shoulder servo mount for a humanoid robot torso. Not a character. No eyes, no legs, no head, no screen, no cartoon style. Specifications: – Size ~60 mm wide, 70 mm tall, 40 mm deep. – Internal pocket for a 40×20×40 mm servo motor, with 1 mm clearance. – 4 mounting holes around the servo pocket (M3). – A flat flange with 4 M3 holes on the inner side to bolt the mount to the torso. – Clean mechanical geometry, angular, industrial CAD style. – Single watertight 3D printable solid mesh, no moving parts. – No textures, no glossy cartoon look.
Anonymous1763215100
hui.
Anonymous1754398724
Crie um extensor de 3cm para ser encaixado num Servo Motor Mg995
Anonymous1760970061
Enter invite code to get credits!